Wholesale & Retail Distribution Now Open. Get in Touch Today
Product How It Works Results The Science Retailers Get in Touch
RepelX™ Paint Additive

Turn any paint into a dust-repelling surface.

Paint That Resists Dust.

RepelX™ is a consumer and professional-grade additive for interior latex and acrylic paints. Mix it in once, and your painted surfaces help resist static charge, dust attraction, and surface buildup.

Most dust on trim and doors is caused by static electricity in painted surfaces that attracts airborne particles. RepelX™ reduces that static at the source, so surfaces stay cleaner for longer.

Helps Resist Dust
Sheen Safe
Long Lasting
4-Step Application
RepelX™ Anti-Static Paint Additive 16 fl oz bottle
3
Sizes: 8, 16 & 32 fl oz
1
fl oz per Gallon
4
Simple Steps
100%
Water-Based Compatible

The Difference Is Visible.

Dust doesn't just look bad. It signals neglect. RepelX™ helps painted trim and walls stay cleaner between cleanings, helping every room look better for longer.

Interior trim showing dust buildup before using RepelX™ Anti-Static Paint Additive
BEFORE

Without RepelX™

Standard paint creates a surface that attracts and holds static charge, causing dust, pet hair, and airborne particles to cling to trim, walls, and baseboards over time.

Clean interior trim after painting with RepelX™ Anti-Static Paint Additive
AFTER

With RepelX™

Paint treated with RepelX™ helps reduce the static charge that attracts dust, so surfaces stay noticeably cleaner between cleanings, for a finish that keeps working long after the job is done.

Results shown are representative examples. Actual performance may vary depending on paint formulation, surface type, environmental factors, and application method. Always test on a small area before full application.

Helps reduce static so dust is less likely to cling to painted surfaces.

Squeeze. Add. Stir. Paint.

For consumer and professional use. Works for homeowners, painters, property managers, and maintenance professionals. No special equipment. No complicated process. Just a simpler process.

1

Squeeze 1 oz

Use the built-in measuring chamber to squeeze exactly 1 oz of RepelX™. No extra measuring tools needed.

2

Add to 1 Gallon

Pour directly into one gallon of interior water-based latex or acrylic paint.

3

Stir for 2 Minutes

Mix thoroughly until the additive is fully dispersed throughout the paint, approximately 2 minutes.

4

Paint as Normal

Apply using your standard brush, roller, or spray method. No technique changes required.

Built for Anyone Who Paints.

Pet owners, families, property managers, professional painters, and anyone tired of dust clinging to freshly painted surfaces.

Pet Owners Families Property Managers Professional Painters High-End Homes High-Dust Environments

How to Stop Dust from Sticking to Baseboards, Trim, and Doors

Dust sticks to baseboards and trim primarily because of static electricity in painted surfaces. As air moves through your home, particles are attracted and cling to these areas. Reducing static at the surface level helps prevent dust buildup before it starts.

The Problem: Static Charge

When you paint a surface, the dried film gradually builds up electrostatic charge from air movement, humidity changes, and everyday friction. That charge creates an invisible field that attracts oppositely charged particles, pulling dust, pet hair, and debris directly onto your freshly painted surfaces.

The Solution: Ionic Balance

RepelX™ contains a biodegradable quaternary ammonium ester compound, a cationic (positively charged) molecule that migrates to the surface of dried paint. These ions create a conductive layer that dissipates static charge as it builds, helping reduce the electrostatic field and minimizing how much dust surfaces attract.

Cleaning

Removes dust temporarily. It returns within days and doesn't address the static causing it.

Short-term only
Dryer Sheets

Slight anti-static effect that wears off within hours. Not a practical long-term solution.

Wears off fast
RepelX™

Reduces static in the paint itself. Works as long as the paint does with no extra steps after application.

Long-lasting

A Smart Add-On For Every Paint Aisle.

Customers already buy paint, brushes, rollers, and tape. RepelX™ is the companion product built around a problem they already have: dust clinging to freshly painted surfaces. One bottle. Better results.

3X

Three Sizes Available

Available in 8, 16, and 32 fl oz bottles, treating up to 8, 16, and 32 gallons of interior water-based paint respectively. The built-in measuring chamber makes dosing simple and accurate. No separate tools needed.

Sheen Safe Formula

Formulated to help maintain the original color, appearance, and sheen of your paint. Matte, eggshell, satin. RepelX™ works with your finish, not against it.

Helps Reduce Static Charge

Helps reduce the static charge that causes dust and particles to cling to painted walls, trim, and baseboards, so surfaces stay looking fresher for longer.

Built for Retail Shelves & Contractor Counters.

RepelX™ is designed for shelf performance: clear benefits, simple instructions, and strong visual appeal. A natural fit anywhere paint is sold.

Paint Departments
Hardware & Home Improvement Stores
Box Store Buyers
Contractor Supply Houses
Property Maintenance Suppliers
Online Retailers & Distributors

Currently in active distribution discussions with regional paint and hardware retailers across the US.

Get in Touch

Whether you're a retailer looking to stock RepelX™ or a buyer interested in volume orders, fill out the form below and our team will follow up as soon as possible.

Notice at Collection (CA residents): We collect the contact and business information you provide above solely to respond to your message. We do not sell or share your personal information. See our Privacy Policy for your CCPA/CPRA rights.

Safety & Use Information

Read Before Use · Keep Out of Reach of Children
  • Intended use: mix into interior water-based latex or acrylic paint at 1 fl oz per 1 US gallon (approx. 30 mL per 3.78 L).
  • Not for: exterior surfaces, oil/solvent-based paints, food-contact surfaces, or use on skin.
  • Flammable liquid — concentrate. Keep away from heat, sparks, open flame, and hot surfaces. No smoking. Use only with adequate ventilation. (Once mixed into water-based paint at the directed dose, the finished paint mixture is no longer classified as flammable.)
  • Keep out of reach of children and pets. Store upright in original container, tightly closed, in a cool, well-ventilated place.
  • Avoid contact with eyes and skin. Causes skin irritation and serious eye irritation. Wear gloves and eye protection when handling the concentrate.
  • If on skin: remove contaminated clothing and wash skin with plenty of water. If irritation persists, get medical advice.
  • If in eyes: rinse cautiously with water for several minutes; remove contact lenses if present; continue rinsing. If irritation persists, get medical attention.
  • Disposal: do not pour down drains or into sewers. Triple-rinse empty container and dispose per local, state, and federal regulations.
  • Net contents: available in 8 fl oz (236 mL), 16 fl oz (473 mL), and 32 fl oz (946 mL) bottles.

Hazard summary per OSHA HazCom 2012 / GHS. Full Safety Data Sheet available above. Active ingredient: quaternary ammonium ester compound (CAS 1335202-95-3) in an isopropanol carrier (CAS 67-63-0). For complete handling, first-aid, and disposal instructions, refer to the SDS. Shipping note: HMIS rating 2-3-0; classified DOT Class 3 Flammable Liquid, UN1219, PG II. Ships ground only (UPS or FedEx Ground); not accepted by USPS or air carriers.

Frequently Asked Questions

Everything you need to know about RepelX™ Anti-Static Paint Additive.

What is RepelX™ and how does it work? +

RepelX™ is an anti-static paint additive that dissipates the electrostatic charge that causes dust to stick to painted walls, trim, and baseboards. You simply mix 1 oz of RepelX™ per gallon of latex or acrylic paint before applying. No special equipment or extra coats needed.

Is RepelX™ compatible with any paint brand or color? +

Yes. RepelX™ is formulated for all interior latex and acrylic paints regardless of brand or color. At the recommended 1 oz per gallon dose it has no effect on tint or finish. You get the same color result your paint chip promised.

How much RepelX™ do I add per gallon? +

The dosage is 1 fl oz of RepelX™ per 1 gallon of paint. Squeeze the measured amount directly into the paint can, stir for 2 minutes until fully blended, then apply as normal. Over-dosing beyond 2 oz per gallon is not recommended.

Will it change the sheen or finish of my paint? +

No. At the recommended 1 oz per gallon ratio, RepelX™ does not measurably alter sheen level. Flat stays flat, eggshell stays eggshell, and satin stays satin. Color accuracy is also unaffected.

What sizes does RepelX™ come in? +

RepelX™ is available in three sizes: 8 fl oz (treats 8 gallons of paint), 16 fl oz (treats 16 gallons), and 32 fl oz (treats 32 gallons). The 32 oz bottle is the most popular choice for contractors and multi-room projects.

Can RepelX™ be used for exterior painting projects? +

RepelX™ is optimized for interior applications where airborne dust and static buildup are the primary concerns. Exterior surfaces face different challenges (rain wash, UV degradation), so results may vary. Contact us if you have a specific exterior use case you'd like to discuss.

How long does the anti-static protection last? +

The anti-static protection is built into the paint film itself, so it lasts as long as the paint does, typically years under normal interior conditions. Unlike surface sprays or wipes, you won't need to reapply between paint jobs.

Where can I buy RepelX™? +

RepelX™ is currently available through approved wholesale and retail distribution partners. If you're a retailer, paint store, or contractor supply house interested in carrying RepelX™, use the contact form above to get in touch with our distribution team.

Is RepelX™ safe to use? +

RepelX™ contains a biodegradable quaternary ammonium ester compound (CAS 1335202-95-3) as its active ingredient, in an isopropanol carrier (CAS 67-63-0). The concentrate is a flammable liquid — use in well-ventilated areas, keep away from heat and open flame, wear gloves, and avoid eye contact. Once mixed into your water-based paint at the directed dose, the finished paint is no longer classified as flammable. A full Safety Data Sheet (SDS) is available for download on this site. HMIS rating: Health 2, Flammability 3, Physical Hazard 0. DOT Class 3 Flammable Liquid (UN1219, PG II) — ships ground only (UPS or FedEx Ground); not accepted by USPS or air carriers.

Does RepelX™ work on ceilings and trim, or just walls? +

RepelX™ works on any surface painted with latex or acrylic paint: walls, ceilings, trim, baseboards, doors, and cabinetry. Baseboards and trim are especially high-impact areas since they sit close to the floor where dust circulation is heaviest.